Our Price: £64.99

Multiplex Easy Glider

The Multiplex EasyGlider PRO is the logical development of the EasyGlider designed for direct drive brushless motors and LiPo batteries.

The EasyGlider PRO is based on the popular and proven EasyGlider and EasyGlider electric. The EasyGlider PRO is designed for brushless outrunner motors and LiPo batteries. Two matching power sets are available including a Tuning version for a little more "oomph". However, the model can also be built as a pure glider. The kit includes a fuselage nose cone in which the Multiplex aero tow mechanism can be installed.

The models flying characteristics are just right for the beginner, although this by no means implies that the more advanced pilot wont enjoy it, quite the contrary. If you are an expert you will soon discover that EasyGlider PRO behaves like a much bigger model, and its performance is also far better than you might expect.

The EasyGlider PRO features:
Low sink rate
Can be ballasted to expand the airspeed range
Landing aid � both ailerons raised
Can be finished using any standard spray can paints after prior treatment with MULTIprimer
Pre fabricated moulded ELAPOR parts
Convenient method of aileron servo connection when the wings are fitted


Kit contents:
Moulded ELAPOR parts, GRP spar, all plastic parts required to assemble the model, small items, linkage components, decal sheet, comprehensive illustrated instructions.

Specification:
Wingspan 1800 mm
Overall length 1130 mm
All-up weight, glider version approx. 800 g
All-up weight, electric version approx. 900 - 980 g
Total surface area 41.6 dm²
Wing loading 17 g/dm²
Wing loading with ballast, max. 350 g approx. 25 g/dm²
(e.g. for slope-soaring or flying in wind)
RC functions Rudder, elevator, aileron (2 servos),
Landing aid (both ailerons raised)

Reccomended equipment (not included):
At least a 4 channel radio with receiver, ideally with mixing facility
2 x Nano-S servos for ailerons
2 x Tiny-S servos for rudder and elevator
1 x EasyGlider PRO power set or Tuning power set
1 x 2s 7.4v 2100 LiPo battery with suitable charger
2 x 500mm Extension Leads
2 x 300mm Extension Leads

« Back